Command Prompt Commands For Computer Networks.
Here are the commands in the Command Prompt related to computer networks.
To perform these commands you must enter the Command Prompt (Click Start -> Run -> type CMD)
1. ipconfig / all
Displays the connection configuration information, such as Host Name, Primary DNS Type, and Ethernet LAN Adapter.
2. ipconfig / flushdns
Delete DNS Cache
3. ipconfig / release
"Removing" all connections IP address.
4. ipconfig / renew
Create a new IP address for a particular adapter.
5. ipconfig / displaydns
Displays the DNS cache.
6. ipconfig / registerdns
Perform refresh control and re-connection control register.
7. ipconfig / showclassid
Displays information on DHCP Class.
8. ipconfig / setclassid
Change the DHCP Class ID
9. control netconnections
Displaying Network Connection.
Knowing the address ip address of the domain name in the write
Displays information on TCP / IP connection is currently active.
Displays the local route.
Displays the name of the computer.
Example: ping www.kekeran.com
Test connection to the site www.kekeran.com.
The less% loss was the better connections.
IP Address Displays route information.
Example display the Command Prompt